Kutter
TH EN
All articles

Help › Channel style

Clone your voice

Record 1–3 minutes of reading, then have AI voice your clips in your own voice.

Tutorial video 43 seconds · Thai narration and subtitles

Use it for voice-overs when recording yourself isn't convenient. You read the on-screen text for 1–3 minutes, the app sends the recording to ElevenLabs to create a cloned voice, and you can then use it as your channel's voice-over.

Before you start

  • A Kutter plan of Creator or higher (on the free plan the button shows a padlock, and pressing it opens the upgrade page)
  • Your own ElevenLabs key. Your ElevenLabs plan must support voice cloning (Starter or higher). ElevenLabs charges go to your own account and don't use Kutter Credits.
  • A quiet room and the microphone you normally use for your clips

Open the voice clone window

The Clone Your Voice button
  1. In สไตล์ของช่อง (Channel Style) › เสียง (Sound), set ผู้ให้บริการเสียง (Voice Provider) to ElevenLabs (if it's on Gemini, you can also press ใช้ ElevenLabs (Use ElevenLabs) in the voice clone box)
  2. Press โคลนเสียงของคุณ (Clone Your Voice) at the right corner of the voice list

If you don't have an ElevenLabs key yet, pressing the button takes you to App settings › AI providers.

Record your voice

  1. Choose a ไมโครโฟน (Microphone), say a few words, and check that the level bar moves
  2. Press เริ่มอัด (Start Recording) and read the text under อ่านออกเสียง (Read Aloud) in the normal tone you use for your clips, with the mic about a hand's width away
  3. Press Stop when you finish a section. To record more, press อัดเทคต่อไป (Record Next Take). All takes together should total 1:00–3:00 minutes.
  4. Listen to each take. If a red warning appears under a take, delete it and record again.
  5. Once the length is right, press ถัดไป (Next)

Name and confirm

  1. Set the ชื่อเสียง (Voice Name), for example "เสียงเจ้าของร้าน" (Shop owner's voice)
  2. Tick the confirmation "ฉันยืนยันว่าเป็นเสียงของฉันเอง หรือได้รับอนุญาตจากเจ้าของเสียงแล้ว" (I confirm this is my own voice, or I have permission from the voice's owner)
  3. Press สร้างเสียง (Create Voice) and wait a moment
  4. Listen to the sample, then press ใช้เป็นเสียงของช่อง (Use as Channel Voice)

In your clips: clips set to AI voice-over use your voice. The voice list shows a เสียงโคลนของคุณ (Your Cloned Voice) tag.

If something goes wrong

  • If you see "เสียงเบาไป ขยับเข้าใกล้ไมค์" (Too quiet — move closer to the mic), move closer to the mic and record a new take.
  • If you see "เสียงแตก ถอยห่างไมค์หรือลดเสียงลง" (Distorted — move away from the mic or lower the volume), move away from the mic or lower the mic level.
  • If you see "มีช่วงเงียบนาน อ่านต่อเนื่อง" (Long silence — keep reading), read continuously without long pauses.
  • If you see "ยังสั้นไป" (Still too short), record more takes until you have at least 1 minute in total. If you see "ยาวเกิน 3 นาที" (Over 3 minutes), delete some takes.
  • If you see "เปิดไมโครโฟนไม่ได้" (Can't open the microphone), allow the app to use the microphone in your computer's settings, then open the window again.

Back to Channel style: Sound

Still stuck? Chat with us (bottom right) or email support@helloworld-solution.com